Jual Hakko HMI V9060iT
Professional Balance Sheet Template For Your Business Free
2019-08-14Jual Hakko HMI V9080ISD
2019-09-27
Jual Hakko HMI V9060iT
| V9060iT | ||
|---|---|---|
| Power supply | Rated voltage | DC24V |
| Permissible range of voltage | ±10％ | |
| Permissible momentary power failure | within 1ms | |
| Demand (maximum rating) | 13W or less | |
| Insulation resistance | DC500V 10MΩ or more | |
| Physical environment | Ambient temperature | 0～50℃*1 |
| Ambient humidity | 85%RH or less (without dew condensation)*1 | |
| Operation altitude | 2,000 meters or lower | |
| Atmosphere | Not to be exposed to corrosive gas, or conductive dust | |
| Storage temperature | -10～60℃*1 | |
| Storage temperature | 85%RH or less (without dew condensation)*1 | |
| Overvoltage category | Category II | |
| Contamination level | Level 2 | |
| Mechanical operating conditions | Resistance to oscillation | Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5～9Hz, pulsating with:3.5mm, 9～150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each) |
| Resistance to shock | Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total) |
|
| Electric operating conditions | Resistance to noise | Noise voltage: 1,000Vp-p, pulse width: 1μs, pulse rise time: 1ns |
| Resistance to static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | |
| Installation conditions | Grounding | Grounding resistance: Less than 100Ω, FG/SG separation |
| Structure | Protection structure: Front case: IP66, Type 4X/13(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting | |
| Cooling system | Natural air cooling | |
| Dimensions W*H*D(mm) | 182.5×138.8×53.0 | |
| Dimensions W*H*D(mm) | 174.0×131.0（+0.5/-0） | |
| Case color | Light gray (black front housing for black model) |
|
| Material | PC resin | |
- *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.
Performance Specifications
| Screen memory (FROM) | 64MB | |
|---|---|---|
| Backup memory (SRAM) | 800KB | |
| Display | Display device | TFT color LCD |
| Resolution | 640×480 | |
| Display size | 5.7″ | |
| Colors | 260 thousand *2 | |
| Backlight | LED | |
| Backlight life | 50,000 hours | |
| Touch switch | Type | Analog resistance film |
| Function switch | Quantity | 6 |
| External interface | D-Sub 9-pin (CN1)*3 | RS-232C, RS-485(two-wire system), RS-422(four-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps |
| Modular 8-pin (MJ1/ MJ2) |
RS-232C, RS-485(two-wire system), RS-422(four-wire system)*4 , Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*5 bps |
|
| SD card | One card slot provided as standard | |
| Ethernet | 1ch, Baud rate: 100Mbps, 10Mbps |
|
| Wireless LAN | – | |
| USB | Type A、Type mini-B(Ver.2.0) | |
| Sound output | – | |
| Clock | Backup period | 5 years (Ambient temperature 25°C) |
| Calendar accuracy | Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied) | |
| Standard | CE marking | EN61000-6-2, EN61000-6-4, EN50581 |
| UL･cUL | UL61010-1、UL61010-2-201*6 、ANSI/ISA 12.12.01 | |
| KC *7 | Compliant | |
| Radio Act | – | |
| Classification Standard | Nippon Kaiji Kyokai (NK) American Bureau of Shipping (ABS) Lloyd’s Register of Shipping (LR) Det Norske Veritas (DNV) |
- *2: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
- *3: Optional unit (DUR-00) is required for the V9071iW and V9060iTD.
- *4: 187,500 bps (four-wire system) for the V9071iW and V9060iTD MJ2 only.
- *5: Only for Siemens MPI (Incompatible with DUR-00).
- *6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
- *7: Black model not certified
- V9060iT
- V9101iW
- V9071iW
- V9150iX
- V9120iS
- V9100iS
- V9080iS
- V9100iC
- V9080iC
Note : kami tidak men Jual Hakko HMI V9060iT series bekas, semua Hakko HMI V9060iT yang kami jual adalah barang baru.
Untuk Permintaan Harga dan Stock, Silahkan menghubungi Divisi Marketing kami dibawah ini :
Marketing :
Yoyok : 0813 – 1586 – 5857
Dian : 0812 – 8280 – 3319
| Jl. Raya Gandul Ruko Teak Garden R3 Kel. Gandul, Kec. Cinere – Depok Jawa Barat, Indonesia 16512 Phone : +6221 2920 4007 Fax : +6221 2912 4040 Email : marketing1@sashmitraindoteknik.com Email : marketing2@sashmitraindoteknik.com |
